RANK 1.
Seismic Audio - SA-Rift_46G - 4x6 Bass / Guitar Speaker Cabinet
- Model #: SA-Rift_46G
- Woofer: Four 6" - each has a 30 oz. magnet with a 1.5" Kapton voice coil
- Frequency response: 20Hz - 10kHz
- 250 Watts RMS, 500 Watts Peak
- Impedance: 8 Ohms
RANK 2.
Seismic Audio Speakers 15” Bass Guitar Speaker Cabinet, 300 Watts RMS Speakers, 1 x 15
- Guitar Speakers: The quality of sound is only as good as your equipment & this bass guitar cabinet should not be overlooked. Each cabinet has one 15" woofer with a 50 oz magnet & 2.5" Kapton voice coil with crystal clear sound & rejecting extraneous noise.
- Cabinet Speakers: Each bass guitar cab is made with 5/8" plywood. The front panel is outfitted with black carpet with black metal corners.
- Bass Guitar Speaker Cab: At 300 Watts RMS, it makes for a great smaller rig or pairs up with a 2x10 or 4x10 cab for a powerful full range set up.
- Bass Guitar Cabinet: These features along with the recessed handles & full metal grill make this cabinet fit right in with your other professional equipment on stage.
- Seismic Audio Speakers: The dual-ported cabinet provides great low-end reinforcement along with great articulation in the mid range.
RANK 3.
Fender Rumble 210 CABINET V3, with 2-Year Warranty
- Fire the roadie due to the featherweight portability of a the plywood ported enclosure and inset durable handles
- For sweet and clear high end with focused definition, this Rumble cabinet features a high-frequency compression tweeter with a convenient three-position full/off/-6dB switch
- For even more secure and efficient coupling between amp head and speaker enclosure, this cabinet is equipped with a Speakon jack in addition to a standard 1/4 jack
- Pair this enclosure with the Fender Rumble 200 head or Fender Rumble 200 combo for a matched appearance and great tone
- Be confident with the power you use with this as the this 2x10 cabinet is rated at 700 watts (program), 350 watts (continuous)
RANK 4.
Sound Town 1 x 12 65W Guitar Speaker Cabinet with Birch Plywood Construction, Black Tolex, Wheat Cloth Grille (GUC112BK)
- 65W 1 x 12" guitar speaker cabinet.
- Clean sounds across the lows, mids and highs
- Robust birch plywood construction with metal corners
- Lightweight and easy to transport
- 16-ohm mono operation
RANK 5.
Seismic Audio - 215 Bass Guitar Speaker Cabinet 2x15 PA DJ 600 Watts Dual
- Terminal cup with two 1/4" jack inputs; Can be daisy chained; 36" tall -19" wide -15" deep
- Woofer -two 15" each has a 50 Ouncemagnet with a 2; 5" kapton voice coil; Wired at 4 ohms mono
- 600 watts rms -1200 watts peak. 30hz –5khz. Sensitivity: 99 db. Full metal grill.
- 5/8 plywood front panel. Black carpet with black metal corners. Recessed handles
RANK 6.
Seismic Audio - 310 Bass Guitar Speaker Cabinet PA DJ 750 Watts 3x10 3 10
- Recessed handles; Full metal grill; Terminal cup with two 1/4" jack inputs; Ported
- Woofer -three 10" each has a 50 Ouncemagnet with a 2" kapton voice coil; Wired at 4 ohms
- 750 watts rms -1500 watts peak. 40hz –16khz. Sensitivity: 103 db.
- 5/8 plywood front panel. 100 watt rms tweeter. Black carpet with black metal corners
RANK 7.
Peavey Headliner 410 Bass Enclosure
- Get more bass for less with 4 x 10" speakers
- Four custom designed 10" ceramic magnet woofers-8 ohms impedance-18mm ply cabinet with internal bracing and steel corners
- 16-gauge perforated metal grille-Durable black carpet covering
- Two 1/4" input jacks and one NL4 four-pine receptacle
- Compatible with most bass amps
- Legendary Peavey reliability
RANK 8.
Hartke 410XL V2 Bass Cabinet
- 400W RMS/ 8 ohm
- 10" Proprietary aluminum cones (100W each)
- 1.5" Voice coils on Kapton formers
- Frequency response: 30hz-5khz
- 2 x 1/4" (Wired in parallel) inputs
- Tuned dual-chamber, dual-ported cabinet
- Solid 3/4" Plywood construction, Textured vinyl covering
RANK 9.
Fender Rumble 2x10 Bass Cabinet, with 2-Year Warranty
- 700W (program), 350W (continuous)
- Two 10" Eminence speakers
- Compression driver horn with attenuator switch
- Magnetic Rumble amp head attachment system
- Lightweight ported plywood enclosure with removable grille
- Hand orientation: Ambidextrous
RANK 10.
Parts Express Knock-Down 2x12 Baltic Birch Bass/Guitar Cabinet
- Unique 3-piece back panel let's you construct cabinet as a sealed back for max bass or open back for natural tonal response
- 9-ply 1/2" Baltic birch plywood for light weight and controlled resonances
- 1.64 cubic foot sealed or open back for use in multiple applications
- Accurate CNC cut for precision and easy assembly
- Rabbeted and dadoed joints provide ample gluing surface area for durable construction
RANK 11.
Trace Elliot 1x10 Speaker Cabinet
- Angled baffle
- One 10" 8-Ohm high efficiency neodymium full-range driver
- 300W (rms) power handling
- Dual paralleled Speakon/phono combo input jacks
- Built-in cradle for ELF bass amp
RANK 12.
Sound Town 2 x 10“ 400W Bass Cabinet w/Horn, 8-ohm, 50oz Magnet, 3” Voice Coil, Birch Plywood, Black Tolex (BGC210BK)
- 2 x 10" 400W RMS bass guitar cabinet (8-ohm)
- Two 10" cast aluminum speakers, one compression driver and horn with attenuator switch, each comes with a 50oz magnet, 3-inch voice coil, delivering exceptional sound quality
- Robust birch plywood construction with black tolex finish. Wheat cloth grill removable
- Two 1/4" and Speakon combo connectors on the back
- Easy to transport with handles on both sides
RANK 13.
Seismic Audio SA-115-USA - 1x15 Bass Guitar Speaker Cabinet with Interchangeable USA Grille
- Model #: SA-115-USA | 1x15 Bass Guitar Cabinet with USA Flag designed grille
- 300 Watts RMS, 600 Watts Peak | Frequency response: 40Hz - 5000Hz | Impedance: 8 Ohms | Sensitivity: 96 db
- Woofer: One 15" with a 50 ounce magnet and a 2.5" Kapton voice coil | 2 Full Metal Grills | 1 Black Grill and 1 USA Flag Design grill | 5/8" plywood front panel
- Black carpet with black metal corners | Recessed Handle | Terminal cup with two 1/4" inputs
- Dual Ports (both in the middle) | HxWxD: 18" x 25" x 14" | Weight: 48 lbs per cabinet
RANK 14.
Sound Town 4 x 10“ 800W Bass Cabinet w/Horn, 8-ohm, 50oz Magnet, 3” Voice Coil, Birch Plywood, Black Tolex (BGC410BK)
- 4 x 10“ 800W RMS bass guitar cabinet (8-ohm)
- Four 10" cast aluminum speakers, one compression driver horn with attenuator switch, each comes with a 50oz magnet, 3-inch voice coil, delivering exceptional sound quality
- Robust birch plywood construction with black tolex finish. Wheat cloth grill removable
- Two 1/4" and Speakon combo connectors on the back
- Easy to transport with handles on both sides
RANK 15.
Orange OBC-112 400-Watt 1x12 Inches Bass Cabinet
- 8-ohm Bass Speaker Cabinet with 1 x 12" Neodymium Speaker - Orange
- 400-watt
RANK 16.
Aguilar SL 112 1x12 Inches Bass Amplifier Cabinet
- Weight: 25 lbs
- Power Handling: 250 watts RMS, 500 watts peak
- Impedance: 8 ohms
- One 12 Inches cast frame woofer, 7oz. Neodymium magnet, custom crossover with variable tweeter control
- One Neutrik Speakon and two 1/4 Inch inputs
RANK 17.
Orange PPC108 20W 1x8" Speaker Cabinet,
- Cloth Grill
- Compact Closed Back Cab
- Classic Orange Tolex Covering
RANK 18.
Fender Rumble 4x10 Cabinet v3 Electric Bass Amplifier Cabinet, with 2-Year Warranty
- Revoiced cabinet for superior level of sonic detail and low-frequency translation
- For even greater performance and convenience, all Rumble cabinets are equipped with Fender"s patented Magnetic Rumble Head-Attachment System
- Additional upgrades include Eminence drivers and premium HF compression tweeters
- Classic Fender styling
RANK 19.
BOSS Katana Cabinet 212 | Speaker Cabinet for the Katana-Head Amplifier | Maximum Tonal Performance & Rugged Durability | Two Custom 12-Inch Speakers | Detachable Back Panel | 150-Watt Power Capacity
- The versatile Katana Cabinet 212 is a companion cabinet for the popular Katana-Head guitar amplifier
- BOSS’s special design provides enhanced bass response and rugged durability while keeping the weight down for easy mobility
- The cabinet comes loaded with two custom 12-inch speakers that deliver powerful, punchy sound with rich, full bottom end, offering exceptional performance for tones from super-clean to ultra-heavy
- Detachable back panel section for closed-back and open-back tones from one cab
- Additional rubber feet for using in a vertical configuration
- Maximum power capacity: 150 watts
- Cabinet impedance: 8 ohms
RANK 20.
Trace Elliot 2x8 Speaker Cabinet
- Pristine full-range bass reproduction
- Two 8" 8-Ohm high efficiency neodymium full-range drivers
- 400W (rms) power handling
- Durable painted cab
- Dual paralleled Speakon/phono combo input jacks