Skip to content

Best sub amp

Table Of Contents Show

We have compared many sub amp products based on user ratings, brands and item quality to ensure helping you choose the right one. Below you can find outcome of the research for the best sub amp currenty available. We have listed products worth checking out:

1. BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock,...

BOSS Audio Systems R1100M Riot Series Car Audio Subwoofer Amplifier - 1100 High Output, Monoblock,...
Our Rating:
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

2. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W

Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
Our Rating:
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
  • Stable at 1 ohm | Remote Subwoofer Level Control Included

3. BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm...

BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm...
Our Rating:
  • Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
  • Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

4. Audiopipe APMN-2000 RMS Class D Monoblock Subwoofer Amplifier, 2000W Mono Sub Amp

Audiopipe APMN-2000 RMS Class D Monoblock Subwoofer Amplifier, 2000W Mono Sub Amp
Our Rating:
  • PLEASE NOTE: Its Recommended Grounding To The Frame of The Vehicle.
  • RMS Power Rating (4 ohms): 770 watts x 1 channel. - RMS Power Rating (2 ohms): 1300 watts x 1 channel.
  • RMS Power Rating (1 ohm): 1944 watts x 1 channel.
  • Frequency Response: 30-180Hz. LPF: 40-180Hz Subsonic Filter: 5-50Hz
  • Fuses: 1 X 150A AFC fuse and fuse holder (included) Remote bass knob, 1 Ohm Stable.

5. Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet...

Planet Audio PL3000.1D Class D Car Amplifier - 3000 Watts, 1 Ohm Stable, Digital, Monoblock, Mosfet...
Our Rating:
  • Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to
  • Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power
  • Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion

6. Recoil RED600-1 1320 Watts Class-D Car Audio Mono-Block Subwoofer Amplifier, 1 Ohm Stable, Remote...

Recoil RED600-1 1320 Watts Class-D Car Audio Mono-Block Subwoofer Amplifier, 1 Ohm Stable, Remote...
Our Rating:
  • Class-D Mono-block Subwoofer Amplifier, 1320 Watts Max Power, RMS 660 Watts x [email protected] Ohm; RMS 520 Watts x [email protected]; RMS 310 Watts x [email protected] Recoil mono amplifiers are stable down to one Ohm, giving you the freedom to put even more subs in your system.
  • Featuring a high-speed MOSFET power supply, premium grade internal components, as well as 4-way protection circuitry, the amplifier will safely operate at the highest levels of performance for hours on end. Highly efficient heatsinks keep the amplifier cool with a sophisticated new look.
  • Recoil mono amplifiers come with bass remote control. Use it to customize your bass on the fly with just a turn of a knob.
  • You'll have full reign over your amplifier with the built-in user control panel, featuring a bass EQ, and variable adjustment tunings for gain level, low-pass filter, and subsonic filter.
  • Dimensions: 9.8" x 7.6" x 2.2" (250mm x 193mm x 56mm)

7. Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier

Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier
Our Rating:
  • Marine Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
  • Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow

8. YaeCCC 1000W Car Audio High Power Amplifier Amp Board Powerful Bass Sub woofer Board 12V

YaeCCC 1000W Car Audio High Power Amplifier Amp Board Powerful Bass Sub woofer Board 12V
Our Rating:
  • 1000W Mono Car Audio High Power Amplifier Amp Board.
  • Strong heat dissipation power drawing technology is compact.
  • High efficiency, wide frequency, high tone quality.
  • 12V 1000W car audio amplifier board provide a wonderful in-car entertainment.
  • With current , overload and short circuit protection.

9. Kicker 46CXA4001 CXA4001-400-Watt Mono Class D Subwoofer Amp

Kicker 46CXA4001 CXA4001-400-Watt Mono Class D Subwoofer Amp
Our Rating:
  • CX-Series Amplifiers are the perfect combination of big power, bigger flexibility and true reliability!
  • A variable 12dB crossover, KickEQ 6dB variable bass boost and a 24dB subsonic filter on mono amps gives you the control you want - to craft the sound you love.
  • Mono KICKER CX Amplifiers are now stable down to one Ohm, giving you the freedom to put even more subs in your system!
  • CX-Series amps include vertical and horizontal mounting hardware, so you can show off your install style!
  • These powerful amps work with as little as nine volts of power from your battery, and as much as 40 volts (400 watts) of speaker-level input signal.

10. Kicker Bundle Compatible with Universal Vehicle 43C124-N Single 12" 150W Loaded Sub Box Enclosure...

Kicker Bundle Compatible with Universal Vehicle 43C124-N Single 12' 150W Loaded Sub Box Enclosure...
Our Rating:
  • (1) Kicker C12 Subwoofer Single 12" Vent Ported Sub Box Enclosure Bundle with Kicker 43DXA125.2 Amp

11. Nobsound G2 Subwoofer Power Amplifier Mini Mono SUB Amp 100W PBTL BTL Bridge Home Theater

Nobsound G2 Subwoofer Power Amplifier Mini Mono SUB Amp 100W PBTL BTL Bridge Home Theater
Our Rating:
  • G2 can be used as a sub amp or a mono channel amp. It has a mode switcher which can change between SUB and PBLT modes conveniently. Equipped with 19V 4.74A high quality power supply.
  • Applications: ① G2 can be used as a subwoofer power amplifier for passive subwoofers; ② G2 can be used as a mono amp to drive single channel. You can use two G2 to drive left and right channel separately, which are known as PBLT / BTL Bridge amp. Compared with normal 2.0CH amps, it can ensure totally no interference between two channels and can provide higher power.
  • It has a gain setting which allows 4-level of output level setting (20/26/32/36 dB). It can keep the purity of the sound and avoid the resistor influence. Besides, it also has a bass cutoff frequency control knob.
  • It adopts TI TPA3116 and NE5532 op-amp, which can offer 100W high power and can drive most home sub and mono speakers. Its optimized circuit can ensure totally no background noise. Besides, it also built-in speaker protection circuit and low pass bass filter.
  • Prompt and courteous customer service. For any questions you have, please feel free to contact us on Amazon.

12. Rockville RV10.2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit

Rockville RV10.2B 1000w Dual 10' Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
Our Rating:
  • Rockville RV10. 2B 1000w Dual 10" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
  • Rockville RV10. 2B Dual 10” Bass Enclosure System With matching Mono Block Amplifier. 1000 Watts Peak Power / 350 Watts RMS CEA-2031 Rating. Dual 10” Bass Enclosure System with matching Mono Block Amplifier. Quasi Transmission Line Cabinet Design. Bonded, Stapled and Braced 3/5" MDF Cabinet. Computer Designed, Under-Side Bass Reflex, Aero-Port System.
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: High quality aviation grade tweed carpet. Oversize Rockville Shield Embroidery. Mono, gold-plated push style, speaker terminal. Dual, High-Power, High-Efficiency 10" Subwoofers. Injection Molded, Talc Filled, Brushed Polypropylene Cones
  • 1200 Watts Peak Power. Power Output: 200 Watts RMS CEA-2006 Power @ 4-ohm and 97dBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20KHz (-3dB). RMS Power: 400 Watts @ 2 ohms. 4 Ohm Mono-Block Class A/B.
  • High Speed MosFET Power Supply with 50 Volt Rail. BiPolar Audio Transistor Output Section. RCA Line Input. RCA Line Output - Full Range. High Level Speaker Line Input. OEM Integration Auto-Start Turn On Circuitry. Dashboard Bass Remote Control with Cable

13. Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1

Kicker 46CXA8001 Car Audio Class D Amp Mono 1600W Peak Sub Amplifier CXA800.1
Our Rating:
  • Efficient Class-D amplifier
  • Variable 12dB crossovers provides control to dial in perfect sound
  • KickEQ 6dB variable bass boost for those additional low frequencies
  • 24dB subsonic filter for protection from potentially damaging frequencies

14. BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer...

BOSS Audio Systems CUBE10 Car Subwoofer and Amp Package – Built-in Amplifier, 10 Inch Subwoofer...
Our Rating:
  • Built-in Amplifier - A built-in 600 Max watt amplifier powers the 10” subwoofer
  • Passive Radiator – A driver unit that has its motor structure (magnet) removed, becomes a passive diaphragm. As a result, there is no Chuffing that you would generally get with a ported box, thus enriching the BASS & making the system more linear
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Input - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the CUBE10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Phase Control - Phase control lets you adjust the speaker phase with the amplifier if your speakers or subwoofer are hooked up “out of phase”

15. Fosi Audio TP-02 Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer...

Fosi Audio TP-02 Subwoofer Amplifier TDA7498E Mini Sub Bass Amp Digital Class D Integrated Subwoofer...
Our Rating:
  • The subwoofer has a built-in low-pass filter, the output power can reach 220W (2 ohms, 20 Hz-120Hz, 0.04% THD, 18db/octave).
  • Advanced circuit design, built-in speaker protection circuit, sturdy aluminum chassis.
  • Using Texas Instruments TDA7498E chip, NE5532 operational amplifier. No popping sound, no audible noise, completely quiet when no sound is playing.
  • Home Hi-Fi mono integrated Class D power amplifier, specially designed for customers who pursue HiFi sound quality.
  • What's you get: TP-02 subwoofer amplifier x1, power adapter x1, AC power cord x1, user manual x1, 18-month global warranty and 24-hour fast customer service.

16. Fosi Audio M03 Subwoofer Amplifier 200 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass...

Fosi Audio M03 Subwoofer Amplifier 200 Watt Mini Mono Audio Amp Full-Frequency and Sub Bass...
Our Rating:
  • 【Hi-Fi Amp with Clean Sound Quality】Fosi Audio M03 subwoofer amp adopts the Instruments TPA3255D2 chip, High Efficient Power Output Up to 200Watt, providing 150 watts RMS into 4-ohm loads or 120watts to 8-ohm loads. Great amplifier to driver any bookshelf speaker or subwoofer.
  • 【Subwoofer amplifier and Full-Frequency Mono Amp】Switch to PBTL, it's a Full-Frequency Mono amp for driving passive speakers and powered subwoofer. Switch to SUB, it's a subwoofer amplifier for diving passive and powered subwoofers.
  • 【Mini Compact but Powerful】Built-in low pass filter for 20-300Hz subwoofers with SUB frequency control, small simple compact design but practical and powerful;
  • 【Home Hi-Fi amplifier】Exclusively designed for the customers who pursue HiFi sound; MAX Power Output:200Watt. Note: Package comes with 32V/5A power supply, you need a more powerful power supply to get the MAX power output.
  • What You Get: M03 amp x1, 32V/5A power adapter x1, user manual x1, 18-Month global warranty, and 24-Hour quick customer service.

17. Rockville SK512 Package 12" 1400w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

Rockville SK512 Package 12' 1400w Loaded K5 Car Subwoofer Enclosure+DB11 Amp
Our Rating:
  • Loaded Sub Enclosure Features: Rockville Single 12" K5 1400w Car Subwoofer Pre-loaded In Vented Sub Enclosure. Peak Power Handling: 1400 Watts. Program Power Handling: 700 Watts.
  • CEA Rated RMS Power Handling: 350 Watts. Final Impedance: 4 Ohm. ¾” MDF enclosure. Bonded stapled and braced. Computer designed vents. Angled at 15 % for perfect bass alignment. High quality aviation grade tweed carpet.
  • Satin Nickel speaker wire push terminals. Enclosure air space is 1.52 Cu Ft per sub. Vent dimensions (inches): 2.25" x 7" x 8.5". Tuning frequency of enclosure: 35 Hz. 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote.
  • CEA Compliant Power Ratings (Rated at less than 1% distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.).

18. BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB,...

BOSS Audio Systems AR1500M Car Amplifier - 1500 Watts Max Power, 2 4 Ohm Stable, Class AB,...
Our Rating:
  • POWER: Maximum Power Output of 1500 Watts at 2 Ohms into one channel. MAX Power Output of 750 Watts at 4 Ohms into one Channel. This amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to
  • HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the AR1500M to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the AR1500M with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • LOW-PASS CROSSOVER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • SWITCHABLE BASS BOOST: Switchable Bass Boost allows you to boost the low bass +18db.

19. MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,BLACK

MTX Audio TNP212D2 Terminator Power Pack Subwoofer System - Set of 2,BLACK
Our Rating:
  • Complete Amplified Bass Package Bundles 2 X 12 Subwoofer Enclosure And Mono Block Amplifier
  • Product Type : Car Audio Or Theater
  • Variable Low- And High-Pass Filters Offer 40Hz–400Hz Range For Sound Shaping
  • Tne212D2 Enclosure Features Dual 12-Inch Terminator Subwoofers With 1200 Watts Max Power

20. Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit

Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit
Our Rating:
  • Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
  • Features of SS8P: Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply.
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°.
  • Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD:
  • Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire.

sub amp Buying Guide

In the past, buyers used to buy top-quality products that had the highest margin of profit. In the present, thanks to the surge in popularity of the Internet the consumer can now examine products before buying them. This is one of the primary reasons for why increasing numbers of people are opting for shopping online instead of going to brick-and-mortar stores. This guide lists the most well-known sub amp and outlines their price features and ranges. It also outlines the factors to take into consideration when buying particular product in terms of quality and style.

If you’re thinking of buying sub amp then you’ve likely been wondering how you can buy one that is the best one. However, it’s not an easy task. It is important to comprehend the various features and benefits of different products and brands But it’s doable. If you’re the first person to buy this article will help you choose the right one.

If you’re planning to buy sub amp, you may be thinking of the best sub amp brands. Buying sub amp can be a challenge with a variety of factors to think about. While the price is essential, product quality is even more important. Making sure you choose a product with best price and user reviews can save you money and assure your satisfaction.

What To Consider When Buying sub amp

Things to take into consideration when choosing the best sub amp

– BRAND: Is the brand credible Do they offer other products as well, and how long they have.
– USER REVIEWS: What is the level of satisfied are the customers buying sub amp do they feel it fulfill their requirements?
– PRICE: Is the price good for what is being offered?
– PRODUCT QUALITY: Is the product manufactured using high-end materials?

Before purchasing sub amp, it is crucial to do some research. The Internet is a reliable source for information about the products you wish to buy. You can use this resource to find out about prices, read reviews and get the best price on sub amp. It is also possible to compare reviews and features, and even purchase private label products in case you’re looking for something that is unique. After this is done you’ll have the ability to make an informed choice. Also, you can save time by buying only the best products on the whinyl website.

When you’re online shopping it’s vital to compare prices. Prices can vary greatly and you’ll be able to find the best deal by comparing prices. Review our research about sub amp, as well as other ratings, for more information. These lists are a great option to locate a great bargain. The best products generally have highest scores. Take the time to read each product’s description, as well as the pros and cons of each. Typically, a product’s popularity can be determined on the basis of its price.

While most consumers prefer the best brands However, more recent brands are able to provide quality at a reasonable price. Older brands typically have a higher budget, but are popular among consumers. It is essential to choose an authorized supplier with well-known reputation for sub amp. Regardless of price, buy the best product you can afford. This will help you save time and money in the end. The more trustworthy and reliable the company you choose to work with then the better outcomes you can expect.

Consumers often turn to the Internet to find what are the best prices on sub amp. The Internet makes it possible to examine prices from a variety of online retailers. If the price of the product was fixed, buyers would typically buy the highest priced item with the highest margins. Thankfully, the internet doesn’t offer this disadvantage. By using the Internet to find the best prices, we can help your readers to find the best price and save time and money.

Conclusion

We hope that our study of is the best sub amp could help you decide on the appropriate one. If you are looking for more products, there are many blog posts about different kinds of products which could grab your interest. Take a look out, and if there are any concerns, feel free to contact us.