Best sub and amp

We have compared many sub and amp products based on user ratings, brands and item quality to ensure helping you choose the right one. Below you can find outcome of the research for the best sub and amp currenty available. We have listed products worth checking out:

1.
Rockville RV12.2B 1200W Dual 12" Car Subwoofer Enclosure+Mono Amplifier+Amp Kit
  • Rockville RV12.2B 1200W dual 12" Car Subwoofer Enclosure amplifier+amp kit
  • Rockville RV12.2B Dual 12” bass enclosure system with matching mono block amplifier. 1200 watts peak power/ 400 watts RMS cea-2031 rating. Dual 12” bass enclosure system with matching mono block amplifier. Quasi transmission Line cabinet design.
  • Angled at 15% for near perfect in vehicle bass alignment. Exterior: high quality aviation grade tweed Carpet. Oversize Rockville Shield embroidery. Mono, Gold-plated push style, speaker terminal. Dual, high-power, high-efficiency 12" Subwoofers.
  • 1200 watts peak power. Power output: 200 watts RMS cea-2006 power @ 4-Ohm and 97DBA (Reference: 1Watt into 4 ohms). Frequency Response: 15Hz - 20Khz (-3Db). RMS power: 400 watts @ 2 ohms. 4 ohm mono-block class A/B.
  • 17" High grade twisted pair 100% Copper RCA cables. 17' 8 gauge translucent Blue Super flex Power cable. 3' 8 gauge clear super flex ground wire. 17' 18 gauge Blue remote cable. 17' 16 gauge speaker wire. Gold Plated anl heat resistant fuse holder
2.
Kicker Bundle Compatible with Universal Vehicle 43C124-N Single 12" 150W Loaded Sub Box Enclosure...
  • Subwoofer Size: 12"
  • Impedance: 4 Ohms SVC
  • Power Watts: 300W Peak/ 150W RMS
  • Car Audio Single 12" Vented Stereo Sub Box Ported Enclosure 5/8" MDF
  • HA-400.1 Clas D Mono Amplifier
3.
Rockville SK510 PACKAGE 10" 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp
  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable
4.
Belva BPKG212v2 1200W Dual 12" Car Subwoofer with Ported Enclosure, Monoblock Amplifier, Wiring Kit...
  • ADD BASS: Add some bass with the Belva BPKG212v2. Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
  • MONO BLOCK AMPLIFIER: 250-watt mono block amplifier that easily connects to any source, including factory radios
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
5.
MTX TNP212D2 12" 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box, Mono Block...
  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
  • AMPLIFIER INSTALLATION KIT & CONVERTER: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal; Converter: Hi/Low Impedance Adapter, RCA Input Sensitivity Adjustment Control
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
6.
Kicker Bundle Loaded Dual 12 Ported Comp 600W Sub Box Enclosure 43DC122 with Harmony HA-A400.1 Amp...
  • Kicker DC122 Loaded Dual 12 Ported Comp 600W Sub Box 43DC122 Bundle with Harmony HA-A400.1 Amplifier & Amp Kit
7.
KICKER 43TC104 Comp 10" Subwoofer in Sub Box Enclosure+2-Ch. Amplifier+Amp Kit
  • Package Includes: (1) KICKER 43TC104 Comp 10" Subwoofer In Thin Profile Sub Box Enclosure, 4-Ohm. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. KICKER 43TC104 Comp Dual 10" Subwoofers In Thin Profile Sub Box Enclosure, 4-Ohm. Subwoofer Size: 10 inches (25 cm). Impedance: 4 Ohms. Power Handling: .300 Watts Peak .150 Watts RMS. Recommended power range: 75 - 150 watts
  • Injection molded SoloKon cone. Optimized Polyfoam Ribbed Surround. Extremely rigid cone, along with 360 degree back bracing eliminates distortion. Double stitched surround for enhanced durability. Tinsel leads woven into the spider with Kicker's Spiralead technology. Single high-temperature 4 ohm voice coil. 45 oz. Magnet structure. Frequency response: 30 - 500 Hz. Sensitivity: 88.5 dB. Enclosure: Single 10" Sealed Truck Enclosure. 3/4" MDF Construction. Heavy duty black carpeting
  • Embroidered Kicker logo. Monogrammed carbon fiber front. Dimensions: . RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms
  • RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms)
  • High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: 200 @ 100Hz. 50 Amp Maxi Fuse
8.
10 Inch 600W Car Under-Seat Sub Woofer Active Powered Amplifier Bass Enclosed
  • Fully functional and easy to debug
  • 68 mm Slim fuselage, installed under the seat, the effect is better
  • 10 inch woofer speaker
  • Design of high temperature resistant coil
  • Black paint stainless steel mesh, no rust, no deformation
9.
(1) Kicker C12 Subwoofer Single 12" Regular Cab Truck Sub Box Enclosure Bundle with HA-A400.1 Mono...
  • Subwoofer Size: 12"
  • Impedance: 4 Ohms SVC
  • Power Watts: 300W Peak/ 150W RMS
  • Single 12" Standard Cab Truck Sub Box Enclosure 5/8" MDF
  • Harmony Audio HA-400.1 Clas D Mono Amplifier
10.
Rockville RW10CA 10" 800 Watt Slim Low Profile Active Powered Car Subwoofer Sub
  • Rockville RW10CA 800 Watt 10" Slim Car Subwoofer.
  • 800 Watts Peak / 200 Watts RMS. PWM MOSFET Power Supply.
  • Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
  • Adjustable Input Sensitivity. Soft Delayed Remote Turn-On.
  • Thermal Protection Circuit, Short Protection Circuit.
11.
Rockford Fosgate P300-10 10" 300W Sealed Powered Subwoofer/Sub Enclosure+Amp Kit
  • Subwoofer:**
  • New Rockford Fosgate P300 10 10" 300 Watt Single Powered Subwoofer Sub Enclosure
  • Power Handling: 300 Watts RMS
  • "Closed loop" design ensures optimum performance between woofer, amplifier and enclosure
  • Built in 0°/180° phase switch
12.
PRORECK PR-122M Complete 1500W Dual 12" Car Subwoofer, Includes Loaded Enclosure with Mono Block...
  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit.
  • PRORECK PR-1500.1M Dual 12” Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms.
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound.
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire set, can meet your complete needs.
  • Wiring Kit Features:(1)High Grade Twisted Pair 100% Copper RCA Cables,(1)Blue Super Flex Power Cable,(1)Black Ground Wire,(1)Black Remote Cable and (1)Remote control,(1)Black Split Tube,(1)Speaker Wire,(1)Gold Plated ANL Heat Resistant Fuse Holder,(1)30 Amp ANL Gold Plated Fuse.Accessories: Wire ties, ring terminals, butt connectors, spades and grommet. Amplifier dimensions: 11 x 9.1 x 1.9 inches (L x W x H) Subwoofer dimensions: 28.7 x 14.2 x 15.7 inches (L x W x H)
13.
(1) Kicker C12 Subwoofer Single 12" Hatchback Sealed Sub Box Enclosure Bundle with Harmony Audio...
  • Subwoofer Size: 12"
  • Impedance:4 Ohms SVC
  • Power Watts: 300W Peak/ 150W RMS
  • Single 12" Sealed Salnted Hatchback Stereo Sub Box Enclosure
  • Harmony Audio HA-400.1 Clas D Mono Amplifier
14.
Kicker Bundle Compatible with Universal Vehicle C12 Comp Single 12" Vented Port Loaded Sub Box with...
  • Universal Car Stereo Vented Port Single 12" Kicker Bundle Comp C12 Loaded Sub Box Bundle with Harmony HA-A400.1 Amp & Install Kit
15.
Rockville RVB10.1A 10 Inch 500W Active Powered Car Subwoofer+Sub Enclosure Box
  • Rockville RBV10. 1A Single 10” 500 Watts Active Subwoofer Enclosure, Size: 10”, Peak Power: 500 Watts, RMS Power: 300 Watts, Nominal Impedance: Single 4-Ohm, 1. 5” Voice Coil, Inverted Carbon Graphite Molded Dust Cap, Kevlar Reinforced Pulp Cone, Double Lami
  • Frequency Response: 35Hz - 200Hz, Sensitivity: 88dB, Anti-Vibration Braced MDF Cabinet, Angled Back Fits Perfectly Against Rear Seats, Computer Tuned Bass Reflex Port, Blue/Black Aviation Grade Tweed Carpet with Embroidered Rockville Logo.
  • Class AB Amplifier, High Speed MOSFET Power Supply, High Level Speaker Inputs, Low Level RCA Inputs, Built-In Low Pass Crossover (30Hz - 160Hz).
  • Accepts up to 8 Gauge Wire, 100mV - 5V Input Voltage, Power (Blue) & Diagnostic (Red) LED Indicators, 20A Fuse, Dimensions in inches: Length 15. 75" x height: 12. 99" x top width 10. 63" x bottom width: 14. 17", Weight: 22. 59 lbs.
16.
MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box,...
  • ADD BASS: Add some bass to your car with the MTX 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power (400-watts RMS for entire enclosure)
  • HIGH QUAILITY: Enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem
  • MONO BLOCK AMPLIFIER: Includes a 250-watt mono block amplifier that easily connects to any source, including factory radios; Designed for use with TNE212D enclosure
  • AMPLIFIER INSTALLATION KIT: Features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect, 30 feet of speaker wire, 20, 4 inch wire ties, 3, rubber grommets, a Number 10 ring terminal, a 5/16 inch ring terminal, and a 1/4 inch ring terminal
  • SPECIFICATIONS: Subwoofer enclosure: Max power: 1200 watt; RMS power: 600 watt; Single 4 ohm voice coils per sub (pre wired down to 2 ohm load); Frequency response : 37 150Hz; Dimensions (HxWxD) : 13.875 x 29.625 x 13.875 inches
18.
MTX TNP212D2 12" 1200 Watt 4 Ohm Dual Loaded Car Audio Subwoofer Package with Sub Enclosure, Planet...
  • COMPLETE SOUND PACKAGE: Upgrade your cars sound system with this complete package that includes MTX 12 inch dual loaded car subwoofer, a sub enclosure, Planet Audio monoblock amplifier and a complete 8 gauge amp installation wiring kit
  • CAR SUBWOOFER: The MTX Terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; Boasts 1200 watts max power and 400 watts RMS; Features rubber surround, polypropylene cone and a 2-inch aluminum single 4 ohms voice coil
  • SUBWOOFER BOX ENCLOSURE: This MTX enclosure features solid MDF construction and thick black carpet; Dimensions (H x W x D1 x D2): 14 x 29.69 x 13.5 x 11.13 inches
  • CAR AMPLIFIER: Planet Audio Amplifier delivers 700 watts RMS x 1 @ 4 Ohm, 1100 watts RMS x 1 @ 2 Ohm, 2500 watts RMS x 1 @ 2 Ohm max power, 1500 watt max power; Switchable input sensitivity: 100mV 2V or 2V 8V; Selectable bass boost (0 to +18dB); Signal to noise ratio: 102dB; Frequency response: 20 20KHz; Dimensions (H x W x L): 2.19 x 10 x 10 inches; Remote control included
  • INSTALLATION WIRING KIT: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; (3) Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; (20) 4-inch wire ties
19.
Patioer 8'' Under-Seat Car Sub Woofer Modified Slim Subwoofer Speaker Stereo Audio Bass Amplifier...
  • Box ultra-thin design: the effective saving of interior space, the appearance of the box with high-grade blanket fabric design, reduce resonance.
  • The use of high-quality MDF board to ensure pure sound quality.
  • The high power tube, has a short circuit reverse protection for the box.
  • The star protective cover: the use of ABS plastic, play a collision protection role.
  • Unique paper cone design, so that the bass is more robust, more stable performance. Any concerns or questions about this product, please contact us.
20.
Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit
  • Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
  • Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. Enclosure is made out of cast aluminum which stays cool at all times. Peak Power Handling: 400 Watts. RMS Power Handling: 100 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz. THD:
  • Peak Power 400 Watts. RMS Power: 100 Watts. Impedance: 4 Ohm. Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches. Frequency Response: 20Hz - 150Hz. Signal to Noise Ratio: >90dB. Sensitivity: 90dB @ 1w / 1m. Input sensitivity, Low level: 300mV. Input sensitivity, High level: 1.0V
  • Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire. Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets . Soft abrasion proof insulating jacket allows for 100% improved flexibility. PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

sub and amp Buying Guide

In the past, buyers would always buy top-quality products with the highest profit margins. However, with the rise in popularity of the Internet the consumer can now examine products prior to buying them. This is among the primary reasons for why more people are turning to shopping online instead of going to brick and mortar shops. This guide provides the top sub and amp and highlights their price options and features. It also provides the elements to think about when purchasing particular product that include quality and design.

If you’re considering buying sub and amp it’s likely that you’ve wondered what you should do to buy Giantdel that’s best one. However, it’s not an easy process. You need to understand the different features and advantages of various products and brands However, it’s feasible. If you’re purchasing for the first time, the following tips can help you select the most suitable one.

If you’re trying to buy sub and amp or similar, you might be thinking about the best sub and amp brands. The purchase of sub and amp is not easy because there are many things to consider. While price is crucial, product quality is even more important. Selecting a product with the best price and reviews from customers will help you save money and ensure satisfaction.

What To Consider When Buying sub and amp

Things to take into consideration when choosing which is the best sub and amp

– BRAND: Is the brand trustworthy and do they sell other products, how long do they remain in business.
– USER REVIEWS: How satisfied are customers when buying sub and amp do they feel it satisfy their expectations?
– PRICE: Is the price adequate for the quality of what’s beeing offered?
– PRODUCT QUALITY: Is the product made of high-end materials?

Before buying sub and amp, it is crucial to do some research. The Internet is a valuable resource for information about the products that you’re planning to purchase. This is the best place to review reviews, compare prices as well as find the best bargains on sub and amp. You can also compare reviews and features, and even buy private label products when you’re looking for something different. After you’ve done that you’ll be able to make a wise decision. You’ll also be able to cut time by only purchasing the best products on whinyl website.

When you’re shopping online it’s vital to check prices. Prices can vary greatly but you can still find the best price by comparison shopping. Look up our research on sub and amp, as well as other reviews, for additional details. These lists are a great way to locate a great bargain. The best items typically have the highest scores. It is important to understand each product’s description, as well as the pros and cons of each. Usually, a product’s popularity can be measured on the basis of its price.

Although many prefer the best brands however, the newest brands can provide good quality at affordable prices. Older brands typically have a higher cost, but are still popular for consumers. You should ultimately choose an authentic supplier with a solid reputation in sub and amp. No matter the price, buy the best product you can afford. This will save you time and cash in the end. The more reliable and trustworthy a supplier is then the better outcomes you can expect.

Many consumers turn to the Internet to search for what are the best prices for sub and amp. The Internet allows you to look up prices across various online stores. Should the price of the product was fixed, buyers were bound to buy the price with the best margins. Fortunately, the internet does not limit this. With the use of the Internet to compare prices, we can help your readers get the best bargain in order to cut down on time, and also money.

Conclusion

We hope that our investigation into that is best sub and amp could help you decide on the best one. If you’re trying to discover more options, we have many posts on different kinds of products, which might get your attention. Feel free to check them for yourself, and if you’ve any concerns, feel free to contact us.